The outside corner complements the white brick panels. The corner consists of two elements that, after folding, are installed on the outer corners of the walls. The elements combine with the white brick and create a uniform surface with a transition from one wall to the other.
There is also an outside corner.
The panel is designed so that it is easy to assemble and there are no visible dividing lines as with typical pattern-cut panels.
Consists of styrofoam that can be painted with acrylic paint. (Natural color – no solvent – solvent)
Advantages of styrofoam panels:
Weight of 1 square meter EPS board – 0.56 kg
Easy transport to the place of use:
Due to the low weight and the professional packaging, transporting and moving the panels to the fourth floor is also associated with little effort.
Height: 44.5 cm
Width: 20 cm
1 panel = 0.089sqm
Thickness: 2.5 cm
Weight of one panel: 0.08 kg
Material density: 35 kg / m3 +/- 5%
Material: EPS (Styrofoam) for building purposes, self-extinguishing.
Purpose and scope
Decorative panels are designed for indoor use and to some extent for outdoor use. When assembling the panels on walls and ceilings is done using generally available adhesives for Styrofoam. Please familiarize yourself with your interface before installation.
The products are not resistant to organic solvents such as acetone, nitro compounds, gasoline, etc. The panels should not be installed near heat sources.
A layer of glue should be applied to the smooth contact surfaces of the panels with the substrate. The surface on which the plate is mounted should be level, dry, and free of dust and grease. When laying panels on paint coatings, remove the peeling paint residue, as well as the cracked, falling plaster. Large surface defects should be filled with filler so that the contact point between the panel and the substrate is smooth.
Installation of decorative panels
Styrofoam decorative panels offer great freedom in interior design thanks to the possibility of simply cutting shapes with a wallpaper knife. The panels can be placed in fragments that act as protruding motifs from a smooth wall or cover all or a greater part of the surface. If you want to cover the entire wall surface with panels, start at one of the corners and arrange the panels in parallel rows. Before laying the first board, cut off the elements that protrude beyond the outline to create a straight vertical edge.
Only the back of the board should be covered with a layer of putty.
When sticking, press firmly enough on the plate, being careful not to damage the decorative surface. The panels are designed to be painted with water-based paints.
Storage, transport, security:
The products should be transported and stored in the manufacturer’s packaging and stored in rooms away from open flames or high temperatures.
The product does not require any special precautions. The product is not designed for children. The products are recyclable.
You buy 1 piece here = the price is for 1 piece!
The delivery times can be extended to 4-6 working days.